Mounting Optional Installation Frame - Fortec Star POS-PRO Series User Manual

7.

Mounting optional installation frame

Note: POS-PRO monitors can be supplied with a suitable mounting frame from our accessories shop.
Below you will find information on the mounting options.
There are two basic options for mounting using the mounting frame:
1. mounting from the front with snap-in bracket
2. mounting from the rear with M4x12 spacer bolts and M4 screws, no snap-in solution
1.
Firstly, the supplied counterparts
for the snap-in bracket must be
attached to the monitor.
2. Mounting from behind
Additional mounting options:
via lateral
mounting holes
with thread
The monitor can then be installed
in a wall using a mounting frame
Fixed mounting option from the rear
with 4 x M4x12 spacer bolts and M4 screws
Mounting optional installation frame
or mount on a panel.
13