First Installation - Fortec Star DISTEC Video Wall Series User Manual

First Installation

4. First Installation
Position of connectors and controls
All connectors for power and cables are located at the bottom of the back side of the display.
Mounting
Distance to wall:
• devices without integrated PC: min.10 mm
• devices with integrated PC: min. 40 mm
Mounting with VESA compatible brackets
Video wall displays are shipped with factory installed mounting angles for VESA compatible brackets. The mounting angles are, wi-
thout further modification suited for landscape or portrait mode and comply with the minimum required distances between the back
side of the display and the wall.
The operating position of the device is perpendicular (90 degrees to the floor). Pay attention to the permissible tilt angle for wall
mounting. The device can be operated both in landscape mode and in portrait mode. The information is
for positioning to note on the back of the device, always.
For mounting on the pre-assembled VESA brackets, a suitable wall bracket must be used whose load-be-
aring capacity corresponds to the weight of the monitor. For fastening to the VESA brackets, use 4 metal
screws of size M6x25. To mount / dismantle the lifting aid (eyebolts), please refer to the enclosed "Moun-
ting Instructions" on the enclosed DVD.
VESA standards: MIS-F 400 x 400 mm (M6)
8
Data cable connectors, OSD menu buttons,
Connection for power cable and on / off switch
top
A
D
A: 50 mm
C
B: 50 mm
C: 10 mm
top view
B
bottom
side view
D
C
C: 10 mm
D: 0 mm