First Installation - Fortec Star Distec XTRA-Line Bartype 37 Series User Manual

First Installation

4. First Installation
Position of connectors and controls
All the connectors for power and cables are located at the bottom of the back side of the display. The OSD keyboard is located at the
top of the back side.
Position of the OSD keyboard
Position of the connectors for power (right)
Position of the connector for ambient light sensor (ALS if 2500 cd panel) and signal cables (left)
Position of the OSD keyboard (middle/ bottom)
Mounting with VESA compliant monitor brackets
VESA- mounting points
The XTRA Line monitor has an integrated VESA mounting.
The operating position of the device is perpendicular (90 degrees to the floor). For wall mounting, the permissible tilt angle is observed.
VESA formats:
VESA 200x200
9