Table of Contents
Advertisement
Original instructions
Use unleaded petrol intended for motor
vehicle use with an octane rating of 91
([R+M]/2) or higher.
79
Sound pressure level at idle
Guaranteed sound power level
113
Regulatory Compliance Mark (RCM).
Product meets applicable regulatory
requirements.
The following signal words and meanings are intended to
explain the levels of risk associated with this product.
DANGER
Indicates an imminently hazardous situation, which, if
not avoided, will result in death or serious injury.
WARNING
Indicates a potentially hazardous situation, which, if not
avoided, could result in death or serious injury.
CAUTION
Indicates a potentially hazardous situation, which, if not
avoided, may result in minor or moderate injury.
CAUTION
Without safety alert symbol
Indicates a situation that may result in property damage.
ASSEMBLY
UNPACKING
The product requires assembly.
■ Carefully remove the product and any accessories
from the box. Make sure that all items listed in the
packing list are included.
■ Inspect the product carefully to make sure no
breakage or damage occurred during shipping.
■ Do not discard the packing material until you have
carefully inspected and satisfactorily operated the
product.
PACKING LIST
■
Power head and upper boom assembly x 1
■
Front handle assembly x 1
■
Safety grass deflector assembly x 1
■
Combination wrench x 1
■
Lower boom and string head assembly x 1
■
2-stroke lubricant x 1
■
Manual x 1
WARNING
If any parts are damaged or missing, do not operate the
product until the parts are replaced. Failure to heed this
warning could result in serious personal injury.
6
| English
WARNING
Do not attempt to modify the product or create
accessories not recommended for use with the product.
Any such alteration or modification is misuse and could
result in a hazardous condition leading to possible
serious personal injury.
WARNING
Never attach or adjust any attachment while power head
is running. Failure to stop the engine may cause serious
personal injury.
WARNING
To avoid serious injury, ensure that all grass deflector
and covers are correctly fitted and all fixings and
fasteners are tight before use. Re-check tightness after
a period of use.
ATTACHING THE FRONT HANDLE
See page 12, step 5.
■
Remove the bolt and wing nut from the front handle.
■
Mount the front handle in front of the foam part.
■
Replace the bolt and wing nut. Tighten the wing nut.
ASSEMBLING THE GRASS DEFLECTOR
See page 13, step 4.
■
Insert the tab on the mounting bracket in the slot on the
grass deflector.
■
Align the screw hole in the mounting bracket with the
screw hole in the grass deflector.
■
Using the combination wrench supplied, tighten the
screw securely.
ATTACHING THE LOWER BOOM TO THE POWER
HEAD
See page 13, step 3.
WARNING
Never attach or adjust any attachment while power head
is running. Failure to stop the engine may cause serious
personal injury.
■
The lower boom connects to the power head by means
of a coupler device.
■
Loosen the knob on the coupler of the power head upper
boom and remove the end cap from the attachment.
■
Push in the button located on the lower boom. Align the
button with the guide recess on the power head coupler
and slide the two booms together.
■
Rotate the lower boom until the button locks into the
positioning hole.
NOTE: If the button does not release completely in
Advertisement
Table of Contents
