Operation - Candy Reverse Action CDV262 User Instructions

Ofrecido por www.electromanuales.com
40002847.qxd 22/03/2005

Operation

1. Open the door and load the drum with
laundry. Ensure that garments do not
hinder closure of the door.
2. If drying delicate items press the
'HEAT SETTING' button to reduce the
heat level. Press again on completion,
to select high temperature.
HIGH Heat setting
LOW Heat setting
3. Turn 'DRYING TIME' dial until the
required drying time aligns with the
symbol (▼).
4. The Pre-iron programme (
provides a conditioning and anti-crease
function. The dryer will heat the load
for 8 minutes followed by a 2 minute
cool down period and is especially good
for garments which may have been left
for some time prior to ironing, in a linen
basket for example. Garments may also
become stiffened when dried outside on
a washing line or inside on radiators,
the Pre-iron process relaxes the creases
in the fabric making ironing quicker and
easier.
11:26 Page 9
4. Gently close the door pushing it slowly
until you hear the door 'click' shut.
5. Press the 'ON' button. The indicator
will light and the drying cycle begins.
6. The load is dried by tumbling in
thermostatically controlled warm air.
Cool air is used for the last 15 minutes
to reduce creasing and cool the load
ready for handling.
7. When the program is fully completed
the drum will stop rotating and the dial
will point to the symbol (▼).
Open the door and remove the load.
)
THE DRUM, DOOR AND LOAD
8. Clean the filter after every drying cycle
to ensure maximum dryer efficiency.
(See 'Filter' section.)
Operation
WARNING!
MAY BE VERY HOT.
9