Optional Accessories; Exploded Drawing And Spare Parts List - Mafell K 85 Ec Translation Of The Original Operating Instructions

Defect
Burn marks on the cut surfaces
Chip ejection blocked
Lower mobile protective cover
does not close or closes only
slowly
8

Optional accessories

- Saw blade carbide Ø 237 x 2.5 x 30 mm, 12 teeth (longitudinal cut)
- Saw blade carbide Ø 237 x 2.5 x 30 mm, 24 teeth (longitudinal and cross cuts)
- Saw blade carbide Ø 237 x 2.5 x 30 mm, 56 teeth (cross cut)
- Guide rail F80, 800 mm long
- Guide rail F110, 1100 mm long
- Guide rail F160, 1600 mm long
- Guide rail F210, 2100 mm long
- Guide rail F310, 3100 mm long
- Sliding bevel segment F-WA
- Accessories for guide rail:
Screw clamp F-SZ100MM (2 x)
-
Connecting piece F-VS
-
Rail bag F160
-
- Rail bag kit F80/160 consisting of: F80 + F160 + connecting piece + 2 screw
clamps + rail bag
- Rail bag kit F80/160 with sliding bevel segment consisting of: F80 + F160 +
connecting piece + sliding bevel + 2 screw clamps + rail bag
- Rail bag kit F160/160 consisting of: 2 x F160 + connecting piece + 2 screw
clamps + rail bag
- Parallel stop, K85-PA.
- Roller edge guide K85-UA
- guiding device L
9

Exploded drawing and spare parts list

The corresponding information in respect of spare parts can be found on our homepage: www.mafell.com
Cause
The saw blade used is
unsuitable for the task or blunt
Wood is too damp
Extended operation without
extraction
Chips and pieces of wood in the
bottom mobile protective cover
-30-
Elimination
Replace saw blade
Clean chip ejection
Connect machine to an external
extraction, e.g. portable dust
extractor
Remove chips and pieces of wood
Order No. 092590
Order No. 092591
Order No. 092592
Order No. 204380
Order No. 204381
Order No. 204365
Order No. 204382
Order No. 204383
Order No. 205357
Order No. 205399
Order No. 204363
Order No. 204626
Order No. 204748
Order No. 204749
Order No. 204805
Order No. 205323
Order No. 205166
Order No. 208171