Ariens IKON XD 42 Operator's Manual page 26

42" Decks
2
2
1. Idler Arm
2. Belt Finger
Figure 24
52" Decks
2
1. Idler Arm
2. Belt Finger
Figure 25
6. Remove deck drive belt.
Install Deck Drive Belt
See Figure 26 and Figure 27.
1. Install deck drive belt.
IMPORTANT: Belt will not have tension until
routed around drive pulley and idler arm is
reinstalled.
2. Reinstall idler arm and belt fingers.
1
2
1
52" Decks
3. Connect idler spring.
See Figure 28 and Figure 29.
EN - 22
Figure 26
42" Decks
Figure 27
Figure 28
42" Decks