Siemens 1FP1/3 Operating Instructions Manual page 39

Alternative rotor bracing
• If you transport the machine after the output element has been pulled on, then you must
axially fix the rotor in another way.
Tightening torques for other rotor shipping brace types
• The thread in the shaft extension indicates the rotor weight. This indirectly specifies the
required preload force when axially fastening the rotor.
Axial preload force for other rotor shipping brace types
Storing the rotor locking device
Store the rotor locking device in a safe place. It must be remounted if the machine is removed
and shipped on further.
1LE1, 1FP1/3, 1PC1/3 shaft height 63 ... 315
Operating Instructions, 11/2023, A5E38483075A
Thread in the shaft extension
M16
M20
M24
M30
Thread in the shaft extension
M16
M20
M24
M30
Preparing for use
4.5 Transport and storage
Tightening torque
40 Nm
80 Nm
150 Nm
230 Nm
Preload
13 kN
20 kN
30 kN
40 kN
37