Page 1
Roborock S7 MaxV Robotic Vacuum Cleaner User Manual Read this user manual with diagrams carefully before using this product and store it properly for future reference.
Page 2
English Français Deutsch Italiano Español Polski Norsk Svenska...
Restrictions WARNING For the purposes of recharging the battery, only use the detachable supply unit roborock CDZ11RR, CDZ12RR, AED01HRR, AED02HRR, EWFD01HRR or EWFD02HRR provided with this product. Do not use this product on elevated surfaces without barriers such as the floor of a loft, an open-ended terrace, or on top of furniture.
A3-3—Air Inlet Note: Press any button to stop the robot during cleaning A7-3—Water Tank Latch Note: Remove this piece if using the Roborock or docking. A7-4—Self-Filling Port Auto-Empty Dock or Empty Wash Fill Dock. Available A1-1—Vertical Bumper for purchase separately. Visit www.roborock.com A1-2—Microphone...
Installation Secure the charging dock 1. Tidy cables and loose items from the ground and move any unstable, fragile, with the adhesive tape precious, or dangerous items to prevent Important Information Wipe the floor of the area where the personal injury or property damage due charging dock will be placed with a dry cloth, to items becoming tangled in, struck by, then secure the dock in place using double-...
Do not use hot water as this may cause the tank to deform. Store or Google Play or scan the QR code to is used for QR Code scanning purposes in the Roborock B4-3—Reinstall the water tank app. Information obtained by the camera will neither be download and install the app.
Instructions and remove the mopping module. After Notes: To allow the robot to automatically vacuum and return to adding water or cleaning the VibraRise mop the dock, start the robot from the dock. Do not move the cloth, reinstall the mopping module and dock during cleaning.
Charging App Features Routine Maintenance After cleaning, the robot will automatically Cleaning Map Main Brush return to the dock to charge. Multi-map management In Pause mode, press the button to send Real-time vacuum and mop route * Clean every 2 weeks and replace every 6-12 months. the robot back to the dock.
Robot * Clean after each use and replace every 3-6 months. take out the dustbin. C8-1— Remove the VibraRise mop cloth Model S270RR C5-2— Open the dustbin cover and remove from the VibraRise mop bracket. Battery 14.4V/5200mAh lithium-ion battery the filter, then empty the dustbin.
If the problem persists after using the recommendations in the table above, from drops and restart. please email our after-sales service team: Europe Support: support@roborock-eu.com Error 5: Main brush jammed. Clean main brush and bearings. Australia Support: service@roborock.com.au Error 6: Side brush jammed. Remove and clean side brush.
WiFi The current Roborock robot is not supported. You can find supported models in the app. Unable to connect to WiFi abruptly. There may be an error with your router settings. Contact Roborock customer service for additional support.
Page 13
Common Issues Solution Problem Is power always being drawn when the The robot will draw power while it is docked to maintain battery performance, but power robot is on the charging dock? consumption is minimal. Does the robot need to be charged for at least 16 hours the first three No.
Page 14
Address of Manufacturer: Floor 6, Suite 6016, 6017, 6018, Building C, Kangjian Baosheng Plaza, No.8 Heiquan Road, Haidian District, Beijing, P.R. CHINA For more product information, visit our website: www.roborock.com For after-sales support, email our after-sales service team: Europe Support: support@roborock-eu.com...
Need help?
Do you have a question about the S270RR and is the answer not in the manual?
Questions and answers