Before running
Auto tune
recorder and set it to Standby – this will enable your television to identify and allocate the necessary
programme positions.
MENU
Press the
button, and then the S or R
1
SET UP
button to select the
SET UP
Press the Q button to highlight
2
to select.
SET UP
Auto tune
Manual tune
Programme swap
Manual fine tuning
Programme skip
EXIT
: To exit
You will be informed that all previous settings will
be lost.
ENTER
Press the
button on the remote control to
3
begin the search for available stations.
will flash and each station found will
x x x x x x x x x x
appear in succession on the screen.
AUTO TUNE
SEARCHING
Channel : 21
Station :
EXIT
: To exit
Auto tune
turn on your Set Top Box and tune to a main channel. Also turn on the video
You can now run Auto tune...
P
P
option from the top bar.
Auto tune
and R
OFF
– – – – – – –
SETTING UP
When the search is complete, the screen will
display a list of all the available BBC1 signals.
AUTO TUNE
Prog.
ENTER
EXIT
If more than one is shown press the Q or
4
P button to highlight and view the choices.
Press the
5
programme position 1.
Note: You can only choose one BBC1 station
at this stage.
Position 2 will appear showing the BBC2 choices.
Repeat the steps above to allocate the
required signal.
Repeat for all the remaining programme positions
6
you wish to tune including a Set Top Box, if
connected. If there are no signals for any
programme positions, simply press the
button to move on to the next one.
Press
7
buttons to view TV.
YOU MAY NOW CONNECT YOUR SCART LEADS
see page 23...
8
Station
Channel
1
BBC1
BBC1
: To store
: To exit
Choose the best picture and sound.
ENTER
button to store BBC1 on
EXIT
to finish and one of the numbered
22
39
ENTER