Gozney Dome S1 Technical Manual

Gozney Dome S1 Technical Manual

Hide thumbs Also See for Dome S1:

Advertisement

Technical Manual
S1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Dome S1 and is the answer not in the manual?

Questions and answers

Summary of Contents for Gozney Dome S1

  • Page 1 Technical Manual...
  • Page 3 Live-Fire cooking made easy.
  • Page 4 Introduction DANGER If you smell gas: Shut gas off to the appliance. Extinguish any open flame. If odour continues, keep away from the appliance and immediately call your fire department. WARNING Do not store or use gasoline or other flammable liquids or vapors in the vicinity of this or any other appliance.
  • Page 5 This instruction manual contains important information necessary for the proper assembly and safe use of the appliance. Read and follow all warnings and instructions before assembling and using the appliance. Follow all warnings and instructions when using the appliance. Keep this manual for future reference.
  • Page 6: Table Of Contents

    SET UP DIGITAL TEMPERATURE DISPLAY TROUBLESHOOTING E1 ERROR CODE E3 ERROR CODE OPTIONAL ACCESSORIES ROPE SEALED DOOR FLUE EXTENSION DOME S1 MANTLE NEAPOLITAN ARCH 3 FIRING UP GAS CONNECTING TO GAS GAS SAFETY INDOOR USE INSTALLING THE IGNITER BATTERY CONNECTING THE GAS HOSE...
  • Page 7 FIRST FIRING TROUBLESHOOTING GAS BURNER DISCONNECTING GAS PUSH FIT REGULATOR CLOCKWISE/ANTICLOCKWISE REGULATOR 4 GENERAL MAINTENANCE MAINTENANCE CLEANING THE VENTURI CLEANING THE OVEN INTERNAL EXTERNAL REPLACING THE PROBE...
  • Page 8: General Advice

    GENERAL ADVICE Dome S1 gets extremely hot and should Do not insert items into Dome S1 that are not be used by children. Do not allow bigger than the dimensions of the oven children near the device during or after mouth.
  • Page 9 Manufacturer’s Name: Gozney Limited Manufacturer’s Address: Units 18 & 19, Radar way, Christchurch, Dorset, BH23 4FL UK. Herewith declare that this product Product: Dome S1 oven Model(s) / Type(s): 4555-S1-01 Trade name: Dome S1 Is in conformity with the following EC directives:...
  • Page 10: Product Overview

    Product Overview - What's in the Box Oven Dock Spanner & Screwdriver Gas Control Dial Gas Hose & Regulator Flue Top Flue Cap Flue Pipe...
  • Page 11 Flue Outlet Ø127mm Gas Inlet Stone Adjustment Tool Burner Guard Thermometer...
  • Page 12: Data Plate

    Data Plate Gozney Limited, Units 18 & 19, Radar Way, Christchurch, Dorset, BH23 4FL UK. Appliance Name: Gozney Dome S1 Model/Type No.: 4555-S1-01 Trade name: Gozney Dome S1 Total nominal heat output 8.2 kW (592g/h) for I 3B/P (30,50) 3P(30,50) for the gas burner: 8.2 kW (614g/h) for I...
  • Page 13 Injector Size 1.4mm 1.52mm 1.3mm Gas Category 3+(28-30/37) 3P(37) 3B/P(30) 3B/P(50) Gas Type Butane Propane Butane, Propane Butane, Propane or their mixtures or their mixtures Gas Pressure 28-30 37 mbar 50 mbar mbar mbar Destination BE, CH, CY, CZ, AL, BE, BG, CY, AT, CH, DE, Countries ES, FR, GB, GR,...
  • Page 14 This section details the correct operation and install of a Gozney Dome S1.
  • Page 16: Safety Considerations

    flame, this will cause and pets. damage to the oven. This oven is not intended to be The Dome S1 unit and the burner must installed in or on recreational vehicles. always be well ventilated. Product may contain sharp edges! Do not move or leave Dome S1 Please use caution.
  • Page 17: Fire

    • Depressed heart action, slowed thoroughly soak the area around the respiration appliance. When spraying water on Dome S1 itself, do not use a strong jet If the exposure has been severe it may of water, as this may cause splashing cause death.
  • Page 18 This section details the set up of the oven and the accessories included with your Dome S1.
  • Page 20: Adjusting The Stones

    Adjusting The Stones Before using Dome S1 it is important that the four blue stone retention wedges and other packaging inside of the oven are removed. The removable stone design of the Dome S1 means that they are not fixed inside the oven and as such can shift backwards during transport.
  • Page 21: Moving The Oven

    Please remove them once the oven is located to its final location and use hand holds below. Do not move Dome S1 whilst in operation or when it is still hot. Never attempt to move the oven on your own.
  • Page 22: Oven Placement

    730mm OVEN PLACEMENT When deciding where to place Dome S1 ensure the area is large enough to accommodate the oven with 5cm around 628mm the base of the dock for air intake. 634mm 462mm 201mm WARNING When placing your oven it is important Always keep the area around the oven to maintain proper clearances from clear of any combustible materials,...
  • Page 23 We recommend the height of the floor to be around the level of the bottom of the users elbow (usually around 120cm from the ground) Ensure the surface the oven is being placed on is completely level, stable and capable of easily holding the weight of the oven - 60kg.
  • Page 24: Flue Assembly

    The flue is designed to have a rain guard which has a 5mm gap from the Dome S1. FLUE ASSEMBLY The rain cap prevents moisture from getting into the oven and should only be used when the oven is cooled and not in use.
  • Page 25: Digital Temperature Display

    Digital Temperature Display...
  • Page 26: Set Up

    SET UP After installing the batteries hold the power button down until the display turns on. Find the sensors jack by removing the plastic cap and plug it into the rear SECONDS of the display, the screen will then show the temperature from within the oven.
  • Page 27: Digital Temperature Display

    Digital Temperature Display Troubleshooting OVEN T OVEN T °F °F PROBE T ll PROBE T ll E1 ERROR CODE E3 ERROR CODE If the thermometer is displaying an If the thermometer is displaying an error code E1. This is caused by either: error code E3.
  • Page 28: Optional Accessories

    With its adjustable vents you’ll be able to control the temperature in the oven. For more details visit the Gozney website. .gozney.com. WARNING Never use the door when the gas burner is lit.
  • Page 29: Dome S1 Mantle

    DOME S1 MANTLE Whether you’re cooking Neapolitan pizza, roasting vegetables or smoking meat, the Dome S1 Mantle makes moving food in or out of the oven simple. Easily bolting onto the oven, the Mantle is made from ceramic coated, food grade aluminum alloy for extra heat and scratch resistance.
  • Page 30 Your guide to burning gas.
  • Page 32: Connecting To Gas

    WARNING: If at any point you smell gas: Shut off the gas from the cylinder, turn off the switch on Dome S1 and extinguish any open flames. If odour continues, move away from the Dome S1 and gas supply then contact your gas supplier or fire service.
  • Page 33: Gas Safety

    If there is excessive abrasion Some foods produce flammable fats or wear it just be replaced with a Gozney and juices. Therefore the Dome S1 approved hose assembly before use. oven should be attended at all times whilst being used.
  • Page 34 Keep the cylinder outdoors in its upright position. Do not connect multiple gas canisters to Dome S or store a spare within the same vicinity. A regulator which complies with EN or EN must fit between the gas canister and the oven. Do not position the gas canister under the oven.
  • Page 35: Installing The Igniter Battery

    INSTALLING THE IGNITER BATTERY Before using the gas burner for the first time you’ll need to install an AAA battery into the ignition module. To do this open the front hatch, the module will be inside and to the left. The module is held in place by a magnet, detach the module and pull it to the front hatch before unnscrewing the cap and placing the...
  • Page 37: Connecting The Gas Hose

    CONNECTING THE GAS HOSE To attach the gas hose to your Dome S1 take the end of the hose and begin screw it onto the gas connector at the back of the oven. Use the spanner found in the front hatch to tighten. This connection must be tested for leaks before using the oven.
  • Page 38: Push Fit Regulator

    PUSH FIT REGULATOR Make sure the lever is in the horizontal position so the button can be pressed. Pressing in the button, place the regulator onto the gas bottle. After releasing the button, turn the lever to a vertical position. This connection must be tested for leaks before using the oven.
  • Page 39: Testing For Leaks

    Testing For Leaks If there is a leak at the hose to oven connection, re-tighten the fitting with WARNING a spanner and check for leaks by You should always check for gas applying a soap-and-water solution to leaks every time you disconnect and the highlighted areas with a brush.
  • Page 40: Ignition

    Ignition Remove the door and the stone retention wedges before lighting the oven. Do not use the door with gas burner. To light the gas burner press the control knob in and turn the knob 90˚ until you hear a clicking sound and the burner ignites. The flame should be yellow in colour and roll along the top of the oven.
  • Page 41: First Firing

    First Firing On your first firing we highly recommend to put the burner on a medium to low flame for 30 minutes to help cure the oven before moving to a high flame. Minutes Approx On subsequent firings after curing, you can bring the oven up to the desired temperature from ignition.
  • Page 42: Troubleshooting Gas Burner

    5 minutes and retry ignititing it. If the problem persists still review the cleaning and maintenance instructions to remove debris in the burner. If the problem persists after trying the following solutions please contact Gozney for further support.
  • Page 43: Disconnecting Gas

    After cooking, be sure to turn off the gas from the gas canister first before turning of the Dome S1. This will allow any gas left in the burner or pipe to be used up safely. Three minutes after turning the...
  • Page 44: Clockwise/Anticlockwise Regulator

    After cooking, be sure to turn off the gas from the gas canister first before turning of the Dome S1. This will allow any gas left in the burner or pipe to be used up safely. Three minutes after turning...
  • Page 45: General Maintenance

    Your guide to general maintenance.
  • Page 47: Maintenance

    Maintenance CLEANING THE VENTURI If your burner’s flame is overly yellow or making more noise than usual you may have debris blocking the venturi. When the oven is turned off, disconnected from the gas and cool, remove the rear right hand side panel using the torx screwdriver located in the front hatch of the dock.
  • Page 48: Cleaning The Oven

    Cleaning The Oven INTERNAL The best way to clean the inside of the Dome S1 is to burn off any food debris or soot that is left behind. When the oven is over 343˚C it will start self cleaning and any burnt on food will burn off after a period of four hours.
  • Page 49: External

    EXTERNAL For the exterior of the oven use a non caustic bleach free cleaning spray on the dirty areas. Clean the area with warm soapy water and a sponge or non abrasive dish cloth and then wipe clean with paper towels. Avoid spraying directly onto the thermometer or control dial.
  • Page 50: Replacing The Probe

    Replacing The Probe OVEN T °F PROBE T ll Only when the oven is cold, remove the thermometer and unplug the cable. Unscrew the probe from inside the oven and pull the old probe out the mouth of the oven.
  • Page 51 Plug the new cable into the back of the thermometer and return it to its position within the Dome S1 Dock. Double check the probe is functioning by checking the digital temperature display and return the panel to the back...

Table of Contents