Testing Operation; Service; Before Calling Service - Thermador M301 Installation Manual

To replace the oven door:
Hold the door firmly in
both hands.
Hold the door at a 30°
angle from the closed
position and insert
hinges into the slots.
You may need to rock
the door forward and
backward slightly to
seat the hinge feet.
The door may need to
be removed and re-
inserted until the
hinges sit correctly in
the slots.
Open door all the way
to expose hinges,
levers, and slots.
Push levers foreward
and down until seated
on the bracket.
Close and open door
slowly to be sure it is
correctly and securely
in place. Door must be
straight, not crooked.
Testing Operation
Turn on power at the breaker.
2. Test the oven mode.
Select the BAKE mode. See the Use and Care Manual
for detailed operation instructions.
3. Verify that the oven light comes on and the oven
begins to preheat.
4. Test the door lock.
Set the SELF CLEAN mode. Confirm that the door
locks when the lock icon appears in the display.
5. If installing a double oven, test the second oven as
well.
6. If any of the tests do not result as explained above,
contact Thermador service for assistance. Otherwise,
the installation is complete at this time.
Service
Before Calling Service
See Use and Care Manual for troubleshooting information.
Refer to the Warranty in the Use and Care Manual.
To reach a service representative, see the contact
information at the front of the manual. Please be prepared
with the information printed on your product data plate
when calling.
Data Plate
The data plate shows the model and serial number. Refer
to the data plate on the appliance when requesting service.
English 14
The data plate is located on the underside of the conirol
panel:
Data Plate