Salicru SPS ONE Series User Manual page 21

2. SAFETY INFORMATION.
2.1. USING THIS MANUAL.
The user manual is available for customers on our website. It can
be read online or downloaded, as appropriate.
In addition to reading the manual, it is necessary to access docu-
ment EK266*08, relating to the
read these instructions carefully before carrying out any action on
the unit in terms of installation or start-up, change of location, con-
figuration or handling of any type.
The purpose of the user manual is to provide information relating
to safety, as well as explanations about the unit's installation and
operating procedures. Read them carefully and follow the steps in
the corresponding order.
Compliance as regards the "Safety instructions" is
mandatory, with the user being legally responsible
for observing and applying them.
All units are supplied with the corresponding labels to guarantee
the correct identification of each part. In addition, the user can
refer to the user manual at any time during installation or start-up
operation, which provides clear, well-organised and easy-to-under-
stand information.
Finally, once the unit is installed and in operation, we recommend
that you keep the documentation in a safe place that is easy to ac-
cess, in case of any future queries that may arise.
The following terms are used interchangeably in the document to
refer to:
"SPS.ONE, equipment, system, unit or
•
Uninterruptible Power Supply System.
Depending on the context of the sentence, they may refer in-
terchangeably to the UPS itself or to the UPS and the batteries.
"Batteries or capacitor
•
that stores the flow of electrons by electrochemical means.
"S.T.S.".- Service and Technical Support.
•
"customer, installer, operator or
•
terchangeably and, by extension, to refer to the installer and/
or the operator who will carry out the corresponding actions,
whereby the responsibility for carrying out the respective ac-
tions may be held by the same person when they act on behalf
or in representation of the installer or operator.
2.1.1. Conventions and symbols
Some symbols may be used and may appear on the unit, batteries
and/or in the user manual.
For more information, see section 1.1.1 of document EK266*08 re-
lating to the "Safety Instructions".
USER MANUAL
"Safety instructions". Please
UPS".- SPS.ONE
banks".- A group or set of elements
user".- They are used in-
SPS.ONE UNINTERRUPTIBLE POWER SUPPLY (UPS) SYSTEMS
21