Display Lighting; Show Measured Values - LaserLiner RollPilot D12 Manual

4

Display lighting

If visibility is poor, switch on the display lighting. In
order to preserve the batteries, the lighting switches
off automatically after 15 seconds. Simply press the
button again to switch the lighting back on.
5
Select unit of measure
m (cm) / ft (in)
7
Save measured value
The device has an internal measured value memory
for storing 5 entries. The selected memory location
is indicated by M1...M5 flashing.
Device ON
1x
Measurement
!
Previously saved measured values are overwritten.
!
The value M1 is always shown when the memory function is activated. The current measured
value appears again as soon as it has been saved to the required location (M1 - M5).
8

Show measured values

Device ON
1x 1x
9
Clear measured value memory
Device ON
1x 1x
08
EN
Select memory location
1x
Select memory location
Select memory location
2 sec
6
Delete measured value
The current measured value is deleted.
2 sec
Save
1x
Exit menu
1x
Clear Exit menu
1x 1x
2 sec
Exit menu
1x