Bar Graph Display - LaserLiner MoistureMaster Compact Plus Manual

7
Index mode / Index Zoom mode
Material
Index mode is used to rapidly locate moisture with comparative measure-
ments, without a direct output of material moisture in %. The output value
(0 through 1000) is an indexed value that increases as material moisture
becomes greater. Measurements made in index mode are independent of
material type and particularly useful with materials for which no characteristics
are stored. When comparative measurements reveal strongly deviating values,
the course of moisture in the material can be localized quickly. Index Zoom
mode has been specially developed for hard building materials such as screed
and concrete in order to track the drying progression of these materials. Index
Zoom mode provides higher resolution in a specific measuring range.
Tip: Before using Index mode on hard building materials, first try out
!
Index Zoom mode as this mode provides a higher resolution. Switch
to Index mode when Index Zoom mode reaches the lower measuring
range (measured value = 0).
8

Bar graph display

The display can be toggled between measured values and a bar graph by
pressing the arrow buttons. The bar moves from left to right as the moisture
level increases. The maximum value is also calculated. The arrow buttons
can be used to switch back to the measured value display at any time.
Construction mat
Plaster
20
EN
Index
Index mode
Index Zoom mode
8.27%