Intended Use; General Safety Instructions - LaserLiner RollPilot D12 Manual

Hide thumbs Also See for RollPilot D12:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 6
Completely read through the operating instructions, the „Warranty and Additional Information"
!
booklet as well as the latest information under the internet link at the end of these instructions.
Follow the instructions they contain. These documents must be kept in a safe place and passed
on together with the product.

Intended use

The electronic distance measuring wheel is designed for use on straight lines and curves. The electronic
measuring wheel provides measured distance values exact to the centimetre over distances of up to
9,999.99 m. The moving pointer shows the exact start and end positions. The folding design and
transport case make the measuring wheel easy to carry.

General safety instructions

– The device must only be used in accordance with its intended purpose and within the scope
of the specifications.
– Keep the measuring device away from children.
– The structure of the device must not be modified in any way.
– Do not expose the device to mechanical stress, extreme temperatures or significant vibration.
– Avoid moisture and sand; clean thoroughly after use
– Note risk of crushing when assembling from the transport position
– Please ensure compliance with the safety regulations set out by local and national authorities
with regard to the correct and proper use of the device.
– Switch off the device before removing the battery.
Safety instructions
Dealing with electromagnetic radiation
– The measuring device complies with electromagnetic compatibility regulations and limits in accordance
with the EMC Directive 2014/30/EU which is covered by the Radio Equipment Directive 2014/53/EU.
– Local operating restrictions – for example, in hospitals, aircraft, petrol stations or in the vicinity of people
with pacemakers – may apply. Electronic devices can potentially cause hazards or interference or
be subject to hazards or interference.
– The measuring accuracy may be affected when working close to high voltages or high electromagnetic
alternating fields.
06
EN

Advertisement

Table of Contents
loading

Table of Contents