Memory Scan - Kenwood TH-22A Instruction Manual

MEMORY SCAN
Memary Scan allows all memory channels containing
data to be scanned.
1 Press [MR] (1 s).
e Scan starts with the channel last recalled, then
ascends up through the memory channels.
2 To reverse the scan direction and scan down through
the memory channels, turn the ENC/SQL control
counterclockwise.
e Upward scan : Turn ENC/SQL clockwise.
@ Downward scan: Turn ENC/SQL counterclockwise.
3 To cancel Memory Scan, press any key other than
[MONI] or [LAMP].
At least 2 memory channels must contain data for Scan
to function. Also, at least 2 memory channels must not
be locked-out.
mg Locking-Out Memory Channels
Occasionally, you may wish to skip over specific
memory channels while scanning.
1 Press [MR] to select Memory Recall.
2 Select the desired memory channel using the
ENC/SQL control or the numeric keys that you
wish to lock-out.
3 Press [F] (1s), [LAMP] to lock-out the selected
channel.
e The "*" icon appears when a channel is locked-
out.
# Each time this key combination is pressed, the
lock-out status toggles ON and OFF for the
selected channel.
e The default is "OFF" (not jocked out).
37