5 Insert the battery case into the bottom of the
transceiver, and push in until the tab on the case
locks in place.
CAUTION:
Do not install the battery pack or batteries in a
hazardous environment where sparks could cause an
explosion.
BATTERY VOLTAGE
LEVEL
The horizontal bars on the Display show the relative
battery voltage while transmitting using "EL" output
power.
Recharge or replace the batteries as necessary
using the accompanying diagrams as reference.
"rt
Wa0u
nope
wees
APO
Transmitter Output Power
p32]
4
as
eS EE
a
"e530 fase
ie
*
6 seconds Transmit, 6 seconds R arbi
48 seconds Standby (AF output 0.2 W / 8 ohms)
e Battery Saver ON