Memory Input; 4-4-4, Paired Channels; 4-4-5, Priority Channel Select; Scan - Kenwood TM-3530A Instruction Manual

@ ® D Set to key
mode
7 = 3 fos}a {FLOCK on ain MICH]
4s) 6) | Lesie
7 is jie ic c
* Mev Fa
WJ) |(od| fe) (ele G
— CH17
— CH19
TX
— CHi6
— CH18
4-4-3. Memory input
(The same procedure is used with the TM-3530A.}
Example: Storing 144.650 MHz with +600 kHz offset in
memory CH 5.
@ Set the M.CH switch to key mode. (The MEMORY
CHANNEL selector will not be illuminated.)
® Press the [4], (6], [5]and [0] keys in order.
("O" will be automatically selected as the last digit
when you enter O ~ 4, as the last digit. "5" will be se-
lected when you enter 5 ~ 9 as the last digit.)
@ Press the [OS] key to select an offset other than the
standard offset for that frequency. You can scroll thru
the different possibility by repeatedly pressing the
key. lf you want the standard offset skip this step.
@ Rotate the MEMORY CHANNEL selector until memory
CHS appears in the memory channel indicator.
@ Press the [M| key to enter the information into
memory.
To confirm memory channel entry press the M.CH key.
Tne MEMORY CHANNEL selector will be illuminated.
The LCD should show the frequency and offset that you
just entered, 4.650 "+". If the display does not show the
correct data, simply repeat steps 1 thru 5.
If you wish to store new data into a memory channel
simply repeat steps 1 thru 5 for the desired memory
channel. Old data will be lost when you press the [M]key.
'4-4-4, Paired channels
Two paired channels allow for "odd split" frequency
shifts. Use this option when the desired frequency shift
is other than the standard 600 kHz (1.6 MHz with the
TM-3530A) shift. Any split within the full operating
range of the radio is possible.
Channel pairs are: CH's 16-17 and CH's 18-19
Example: A 1 MHz split stores 144.600 MHz in CH 16
and 145,600 MHz in CH 17.
@ Follow the "MEMORY INPUT" procedure on page 17
to store these frequencies in channels 16 and 17.
Either frequency (receive or transmit) may be stored! in
either channel of the pair.
@ To operate this channel pair, set the M.CH switch to
memory mode and select either CH 16 or CH 17 with
the MEMORY CHANNEL selector.
@® Transmit, and the displayed frequency changes to the
transmit frequency stored in the alternate channel of
the pair.
@ Release the PTT switch, and the original receive fre-
quency stored in CH 16 or CH 17 will display.
The other channel pair, CH 18 - 19, operates in the same
way. When channel pairs are used, the 600 kHz (1.6
MHz with the TM-3530A) shift and mode indicators, |+
=]and [S| do not function.
de gees o t e Se
Set the AL
switch to ON.
@ Press to designate the
priority channel.
Ta mae || KENWOOD.
TM=2550A
4-5. SCAN
Select to TO ar CO prior to ini-
tiating scan.
-=CO.MTO PUSH ON
Lights during scan operation. @ Set to memory mode.
LZ
5]
PHONE TONE VOICE.
Oooo
@ Press to start
scanning
@ Press to release scanning.
{Scanning may also be re-
leased by pressing the PTT
switch.)
4-4-5. Priority channel select
the priority channel.
@ Depress the AL switch.
@ Press the [PS] key to enter the selection.
For details, see page 34.
4-5-1, Memory scan from the keyboard
@ Press the [SC] key to initiate scanning.
Scan will begin from the current displayed channel ad-
vancing, toward the higher numbered channels.