Priority Channel Select; Scan; Memory Scan From The Keyboard - Kenwood TM-3530A Instruction Manual

channel.
4-5. SCAN
Select to TO or CO prior to ini-
— |
=CO.MTO PUSH ON
Lights during scan operation. @ Set to memory mode.
@ Press to start
scanning
@ Press to release scanning.
(Scanning may also be re-
leased by pressing the PTT
switch.)
4-4-5. Priority channel select
Any one of the 23 memory channels can be selected as
the priority channel.
@ Depress the AL switch.
@ Select the memory channel to be the priority channel
using the MEMORY CHANNEL selector.
@ Press the [PS] key to enter the selection.
SCAN operations are divided into keyboard scan,
memory scan and priority channel scan. For SCAN oper-
ation, the squelch control should be advanced to the
threshold point. (See page 11 for squelch control.)
First, select either TO (Time Operated) hold or CO (Carrier
Operated) hold with the SCAN switch.
The TO scan duration may be set thru the use of an inter-
nal potentiometer.
For details, see page 34.
4-5-1. Memory scan from the keyboard
@ Press the M.CH switch to select memory mode. (The
MEMORY CHANNEL selector will light.)
@ Press the key to initiate scanning.
Scan will begin from the current displayed channel ad-
vancing, toward the higher numbered channels.
17