Ce Ceeee Ees - Kenwood TH-22A Instruction Manual

GLOSSARY
1 MHz Step
APO (Automatic Power Off)
Auto Page Cancel
A function that automatically switches OFF the Page
function after Page codes have been transmitted.
The
purpose is to avoid sending Page codes at the start of
every transmission.
Automatic Transmit Offset
This function is for repeater users. It automatically
selects the correct transmit frequency offset (both
direction and amount) according to established band
plans.
64
Autopatch
A service available widely in the U.S.A. and Canada that
allows portable or mobile stations to access the public
switched network by connecting through a local repeater.
Telephone numbers are sent via DTMF signals by using
the keypad. Only non-commercial communication is
authorized.
Battery Saver
An energy-saving function that reduces power
consumption after 5 seconds of inactivity.
The function
makes possible longer times between battery charges.
BNC
A threadless connector universally used at VHF and
lower UHF frequencies. The connection is secured by a
quarter-twist of the male connector.
Beep Tone
A selectable function that generates a tone each time a
key is pressed to provide audible confirmation that the
key was actually pressed, or to provide an error tone to
indicate an error condition exists.
Busy Frequency Lock-out
A function that automatically prevents transmission on a
frequency that is busy.