Split Memory Channels - Kenwood TH-22A Instruction Manual

22
4 Press [MR].
e
The
The selected frequency and associated data are
stored in the memory channel.
If the memory channel selected in the previous
step already contained data, the new data
overwrites the previous data.
The previous made is restored.
"#" symbol under the channel number indicates
the following:
eo
Symbol ON : Channel contains data.
Symbol blinking : Channel empty.
"ti St fw
("la "a, ,o
a i oe eT
APO Ss
a Split Memory Channels
1
After storing the receive frequency using "Simplex
memory channels" instructions in the preceding
section, select the desired transmit frequency.
2 Press [F] (1 s) to select Memory Storage.
3 Turn the ENC/SQL control to select the memory
channel containing the receive frequency.
Press [PTT] + [MR].
e The selected transmit frequency is stored in the
memory channel, and the previous mode is
restored.
e if the memory channel selected does not contain
a receive frequency, your transceiver beeps and
restores the previous mode.
e Associated data such as Tone status/frequency,
frequency step, and DTSS status/code are not
overwritten. However, transmit shift status and
Reverse status data are erased. ,