Table of Contents
Advertisement
The Tiled URL and Full Screen URL fields are mandatory. All other fields are optional.
To see a specific user interface on the tiles:
1. Enter the URL in the Tiled URL field of Device Configuration. For example, add WebHMI URLs.
2. Click on the check mark button to add the device you configure to the Selected Devices list.
Selected Devices
To add already discovered devices from the Detected Devices list to the Selected Devices list, click on the Add button next
to the device you want, or drag the device to the top of the Selected Devices list.
You can determine the order of the devices in the Selected Devices list by clicking on the Up or Down buttons next to the
device you want, or you can drag and drop the devices into the list. You can also remove the device from Selected Devices
by clicking on the Remove button.
After you expand the device information, the Settings button appears.
To configure the device further, click on the Settings button.
20
VisionView Web User Interface
Advertisement
Table of Contents
