Legal Notices - Cognex VisionView Web Reference Manual

Table of Contents

Legal Notices

The software described in this document is furnished under license, and may be used or copied only in accordance with the

terms of such license and with the inclusion of the copyright notice shown on this page. Neither the software, this document,

nor any copies thereof may be provided to, or otherwise made available to, anyone other than the licensee. Title to, and

ownership of, this software remains with Cognex Corporation or its licensor. Cognex Corporation assumes no responsibility

for the use or reliability of its software on equipment that is not supplied by Cognex Corporation. Cognex Corporation makes

no warranties, either express or implied, regarding the described software, its merchantability, non-infringement or its fitness

for any particular purpose.

The information in this document is subject to change without notice and should not be construed as a commitment by

Cognex Corporation. Cognex Corporation is not responsible for any errors that may be present in either this document or the

associated software.

Companies, names, and data used in examples herein are fictitious unless otherwise noted. No part of this document may be

reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, nor transferred to any

other media or language without the written permission of Cognex Corporation.

Portions of the hardware and software provided by Cognex may be covered by one or more U.S. and foreign patents, as well

as pending U.S. and foreign patents listed on the Cognex web site at: cognex.com/patents.

The following are registered trademarks of Cognex Corporation:

Cognex, 2DMAX, Advantage, AlignPlus, Assemblyplus, Check it with Checker, Checker, Cognex Vision for Industry,

Cognex VSOC, CVL, DataMan, DisplayInspect, DVT, EasyBuilder, Hotbars, IDMax, In-Sight, Laser Killer, MVS-8000,

OmniView, PatFind, PatFlex, PatInspect, PatMax, PatQuick, SensorView, SmartView, SmartAdvisor, SmartLearn,

UltraLight, Vision Solutions, VisionPro, VisionView

The following are trademarks of Cognex Corporation:

The Cognex logo, 1DMax, 3D-Locate, 3DMax, BGAII, CheckPoint, Cognex VSoC, CVC-1000, FFD, iLearn, In-Sight (design

insignia with cross-hairs), In-Sight 2000, InspectEdge, Inspection Designer, MVS, NotchMax, OCRMax, PatMax RedLine,

ProofRead, SmartSync, ProfilePlus, SmartDisplay, SmartSystem, SMD4, VisiFlex, Xpand

Other product and company trademarks identified herein are the trademarks of their respective owners.

Table of Contents

Visionview web panelVisionview web hdmi