Quantech QTH1 0035 Quick Start Manual page 14

Setting the qauntity of combined modules
1. In access level O, press System Setpoints in the
menu and select Unit Quantity.
2. As an example, for a modular array that includes
two single modules or a combination of two mod-
ules, set the quantity of modules to 2. Each mod-
ule has a control panel.
Sequence module selection
1. In access level O, press Unit in the menu and se-
lect Unit Selection.
2. To view the data of each separate module on com-
bined modules, choose the module number you
want to check. See the following figure for more
information.
Figure 14: Sequence module selection
14
Form QTH1-QSG1
Issue date: 12/20/2023
Quantech