Mark Waypoint Page - Garmin eTrex Summit Owner's Manual And Reference Manual

To change the elevation:
1. Press the PAGE Button and switch to the 'MENU'
Page. Press the UP or DOWN button and highlight
'MARK'. Press ENTER. The 'MARK WAYPOINT' Page
appears.
2. Press the UP or DOWN button and highlight the
'ELEV' field and press ENTER. The 'ENTER CORRECT
ELEVATION' Page appears.
3. Use the UP or DOWN button to highlight the
desired digit, press ENTER. A selection window
appears. Press the UP or DOWN button to select a
new number. press ENTER. Repeat step 3 until all
numbers are changed.
4. Press the UP or DOWN button to highlight the 'OK'
field and press ENTER. The 'MARK WAYPOINT' Page
appears with the corrected elevation displayed.
To change the location (latitude/longitude):
1. Press the PAGE Button and switch to the 'MENU'
Page. Press the UP or DOWN button and highlight
'MARK'. Press ENTER. The 'MARK WAYPOINT' Page
appears.
2. Press the UP or DOWN button and highlight the
'LAT/LON' field and press ENTER. The 'EDIT
LOCATION' Page appears.
3. Use the UP or DOWN button to highlight the
desired letter or digit, press ENTER. A selection
window appears. Press the UP or DOWN button to
select a new letter or number. press ENTER. Repeat
step 3 until location is changed.
4. Press the UP or DOWN button to highlight the 'OK'
field and press ENTER. The 'MARK WAYPOINT' Page
appears.
5. Press the UP or DOWN button to highlight the 'OK'
field and press ENTER. Your location with the new
latitude/longitude is now stored in memory.
UA-1005.031
Reference
Mark Waypoint
Page
The 'ENTER CORRECT
ELEVATION' Page allows you
to change the elevation for the
waypoint.
The 'EDIT LOCATION' Page
displays on-screen
instructions on how to edit
the waypoint location.
29