Menu Page; Mark Waypoint Page - Garmin eTrex Summit - Hiking GPS Receiver Owner's Manual

Menu Page Selections
The Menu Page turns the eTrex Summit into a powerful navigation tool. With the Menu
Page you can customize the display, transfer information from a computer to the eTrex
Summit and back again, and manage and organize all of your waypoints. Now let' s take a
detailed look at each of the Menu Page selections.

Mark Waypoint Page

The MARK WAYPOINT Page allows you to create a waypoint at the eTrex Summit' s cur-
rent location or at a location you enter in the position field. When marking a waypoint, you
can change the waypoint symbol, name and elevation.
To mark a waypoint:
Press and hold the PAGE button and switch to the MENU Page. Press the UP or DOWN
button to highlight 'MARK.' Press ENTER. The MARK WAYPOINT Page appears.
To change the symbol:
1. From the MARK WAYPOINT Page, press the UP or DOWN button and highlight the way-
point symbol (above the waypoint name) and press ENTER.
2. Press the UP or DOWN button to highlight the desired symbol. Press ENTER to save.
To change the name:
1. From the MARK WAYPOINT Page, press the UP or DOWN button to highlight the numeric
name, then press ENTER. The EDIT WAYPOINT NAME Page appears.
2. Press the UP or DOWN button to highlight the desired letter, then press ENTER. A letter
selection window appears. Press the UP or DOWN button to select a new letter and press
ENTER. Repeat until all letters are changed.
3. Press the UP or DOWN button to highlight the 'OK' field, then press ENTER. The way-
point name is changed.

Menu Page

Mark Waypoint Page
Remember that pressing and holding the ENTER
button gives you the 'MARK WAYPOINT' Page
where you can mark a waypoint.
Highlight the small flag symbol and press
ENTER to activate the symbol selections.
25