Software And Setup - MOXTEK X-ray Sources Operation Manual

Software and Setup

140kV Software Guide
1. Click on link to access the 140kV folder. See below page for location of software downloads.
2. Download the MOX140G Software folder
3. Unzip the downloaded file "MOX140G Software" onto desktop
4. Navigate to the "Drivers" folder
5. Open the "Moxtek 2.12.28-Signed" folder
6. Right click the "dp-chooser.exe" and select "Run as administrator"
7. Follow the prompts to install the driver
8. Once complete, run the "CDM21228_Setup.exe" file to install the FTDI driver
9. Follow the prompts to install the driver
10. Once complete, navigate to the main 140kV folder
11. Run the "140kV PC Controller.application" file
12. Once the 140kV PC Controller software is installed, run the program
13. A taskbar search for "140kV PC Controller" can locate the new file if needed
MOXTEK
®
Figure 4: Moxtek Website Software Downloads Page
6
TUB-MAN-1022 Rev A
Subject to technical change without notice