Chapter 4: Initial Setup And Configuration - Dell EMC VxRail G560 Owner's Manual

To install and configure your new VxRail, you can purchase deployment services, or choose the VxRail self-deploy (no installation
services) option.
If you purchased deployment services for your VxRail, do not rack the VxRail or connect power. Contact your Dell account team
or reseller to arrange for deployment by Dell certified technicians.
If you chose the VxRail self-deploy option, go to
Extensive network experience, understanding of VxRail infrastructure planning, and deployment knowledge are required for
self-deployment.
NOTE:
● If you are uncertain you can complete the end-to-end deployment process, contact your sales representative for Dell
Technologies Services.
● If you are unable to complete the deployment, contact your sales representative for Dell Technologies Services.
CAUTION: During the VxRail deployment process, an iDRAC account that is named vxadmin or PTAdmin is
created. This account provides hardware information to the VxRail Manager and is required for the VxRail
Manager and the cluster to function properly. Ensure that you do not modify or delete this account.
26 Initial setup and configuration
Initial setup and configuration
www.dell.com/installvxrail for deployment instructions and guidance.
4