Dell EMC VxRail G560 Owner's Manual page 28

If you have opted for secure default access to iDRAC, the iDRAC secure default password is available on the back of the
appliance Information tag. If you have not opted for secure default access to iDRAC, then the default user name and password
are root and calvin. You can also log in by using Single Sign-On or Smart Card.
NOTE: You must have iDRAC credentials to log in to iDRAC.
NOTE: Ensure that you change the default user name and password after setting up the iDRAC IP address.
The iDRAC IP address is pre-configured for DHCP. This can be changed to a static IP address by logging into iDRAC.
NOTE:
● To access iDRAC, connect the network cable to the Ethernet connector 1 on the system board.
● Ensure that you change the default user name and password after setting up the iDRAC IP address.
28 Pre-operating system management applications