Wifi Configuration - La Cimbali M200 Engineer's Manual

1
1) The items are scrolled by pressing the icons
.
2) Press
3
Press the WIFI RESET icon:
Wi-Fi Menu
configure the following Wi-Fi settings as
-
shown below:
- NETWORK - enter the name of the access point.
- SECURITY - indicate the type of wireless network security:
- KEY - enter the password to access a protected Wi-Fi
network (WPA or WEP)
- URL - enter listener.gruppocimbali.com.
- Port - enter 61618.
- CONNECT - to connect to the access point selected.
- RSSI - signal intensity:
- IP - displays the IP address assigned to the machine by
the wireless access point.
- RESET - To restore the parameters to the standard
parameters.
- MAC - Represents the Mac address of the machine's
Wi-Fi module. This parameter is read-only and cannot be
modified.
- fTX - reduces data transmission to the remote server:
transmits all data daily upon machine start-up, and faults/
washings when they occur;
- as per level 1 plus hourly counts;
- as per level 2 plus pings every 10 min. (default).
Place the cursor on the item CONNECT to manually connect
to the access point selected; if the configuration of the Wi-Fi
module is correct, the following icon appears on the display
:
Wi-Fi configuration
2
Scroll through the items by pushing the
4
Reset the parameters with the icon
of the standard data:
5
1) The items are scrolled by pressing the icons
2) Press the icons required to configure the parameters.
6
40 EN
icons.
- initialization