Led Code Chart - Intex 26669EG Owner's Manual

LED Reading
80
00
01
02
03
04
05
06
07
08
09
10
11
12
90
91
92
93
"BLANK"
When Code "90" alarm is shown, ensure the timer of the filter pump is set
one (1) hour longer than the Saltwater System.
If the filter pump does not have a built-in timer, the filter pump needs to
be turned on/off manually every day.
SAVE THESE INSTRUCTIONS
(260PO) MODEL ECO7110&8110 SALTWATER SYSTEM ENGLISH 7.5" X 10.3" PANTONE 295U 05/15/2015

LED CODE CHART

Definitions
Boost Mode
Stand-By Mode (Start-up)
Minimum Operating Hour (1 hour remaining)
Operating Hours (2 hours remaining)
Operating Hours (3 hours remaining)
Operating Hours (4 hours remaining)
Operating Hours (5 hours remaining)
Operating Hours (6 hours remaining)
Operating Hours (7 hours remaining)
Operating Hours (8 hours remaining)
Operating Hours (9 hours remaining)
Operating Hours (10 hours remaining)
Operating Hours (11 hours remaining)
Maximum Operating Hours (12 hours remaining)
Alarm Code(Low Pump Flow/No Pump Flow)
Alarm Code (Low Salt Level)
Alarm Code (High Salt Level)
Stand-By Mode (Operating Process finished)
No Power or "Power Saving Mode" waiting to start next
Saltwater System cycle.
IMPORTANT
260
English
PO
Page 20