Intex 26669EG Owner's Manual page 10

SETUP INSTRUCTIONS (continued)
Connecting the system to pump and pool with 1-1/2" (38mm) connections/hoses:
Pump and pool with 1-1/2" (38mm) connections do not require the adaptors A (1) or B (8).
Install as follows:
Drawing #2
WATER TO
POOL
ID 1-1/2" (38mm)
HOSE
SALTWATER SYSTEM WITH E.C.O.
(ELECTROCATALYTIC OXIDATION)
1. Go directly to step 2 if your pool is empty. If your above-ground-pool is filled with water,
close the plunger valves before installing the Saltwater System.
2. Disconnect the water return hose from the filter pump connection and connect it to the
Saltwater System outlet.
3. Connect the connector hose (7) to the filter pump outlet connection.
4. Open the plunger valves to allow the water to flow.
SAVE THESE INSTRUCTIONS
(260PO) MODEL ECO7110&8110 SALTWATER SYSTEM ENGLISH 7.5" X 10.3" PANTONE 295U 05/15/2015
SWIMMING POOL
WATER FROM
FILTER
PUMP
7
ID 1-1/2" (38mm)
260
English
PO
PLUNGER
VALVE
POOL
HOSE
Page 9