Table of Contents
Advertisement
Your phone
Group number
6
7
8
9
Cisco Wireless Phone 860 hardware and buttons
The following figure shows the Cisco Wireless Phone 860 and 860S with a barcode scanner.
Hardware or buttons in group
On the bottom of the phone is the headset jack on the left, the USB charging port in the
middle, and the speaker on the right.
• Headset jack—Supports a headset with a 3.5-mm audio plug.
• USB charging port—Supports a USB cable to charge the phone.
• Speaker—Receives audio you can hear.
On the left side of the phone are three programmable buttons. By default, the top and
middle buttons are set as Volume up and Volume down respectively. By default, the
bottom button is not set.
• Programmable Volume up button—By default, this programmable button is set to
turn up the volume.
• Programmable Volume down button—By default, this programmable button is set
to turn down the volume.
• Programmable button—By default, this programmable button is set as the barcode
scanner on the 840S phones.
On the upper left back of the phone is the rear camera above the flash lens or torch, with
the rear microphone to the right.
• Rear camera—Captures images.
• Flash lens or torch—Emits light for a camera flash, or torch flashlight.
• Rear microphone—Cancels noise.
On the lower back of the phone are the charger contacts on the left, the battery latch in
the middle lower edge of the battery, and the battery.
• Charger contacts—Connects with the contacts on a desktop charger or multicharger
to charge the battery.
• Battery latch—Releases and catches the battery in the phone.
• Rechargeable battery—Powers the phone.
Cisco Wireless Phone 840 and 860 User Guide
Hardware and buttons
17
Advertisement
Table of Contents
