Table of Contents
Advertisement
Emergency app
Note
Procedure
To cancel the warning and impending alarm, swipe across the yellow Warning screen from left to right over
the arrows.
Cancel motion conditions alarm
If you don't cancel an Emergency motion conditions warning, the phone goes into the alarm state. The alarm
sounds and a red Alarm screen appears. If configured, the phone generates and sends an alarm notification
to a security application, and places an emergency call.
If an emergency call is placed because of the alarm, you or the other party can end the call. However, the
phone remains in the alarm state until you manually cancel the alarm.
Note
Procedure
To cancel the motion conditions alarm, swipe across the red Alarm screen from left to right over the arrows.
Suspend motion conditions monitoring
You can't disable or change Emergency motion conditions set by the administrator. However, if the
administrator enables the snooze feature, you can temporarily suspend Emergency motion conditions monitoring.
This snooze feature is helpful if you must run, tilt, or stay still for a period longer than normal.
Note
Procedure
Step 1
Swipe down on the notification bar.
Step 2
To Start snoozing, tap the Emergency notification.
While in the warning state, you can still use the phone for any other operation. However, the warning continues
until you cancel it. To return to the warning screen, pull down the Notification Bar and tap the notification.
While in the alarm state, you can still use the phone for any other operation. However, the alarm continues
until you cancel it. To return to the alarm screen, pull down the Notification Bar and tap the notification.
The Emergency notification displays the amount of available snooze time in brackets.
Cancel motion conditions alarm
Cisco Wireless Phone 840 and 860 User Guide
83
Advertisement
Table of Contents
