Deploy A Disk Image; Deploy On Sd Card; Deploy On Internal Emmc - Cherry theobroma JAGUAR SBC-RK3588-AMR User Manual

Hide thumbs Also See for theobroma JAGUAR SBC-RK3588-AMR:

Table of Contents

6 Deploy a disk image

This chapter describes how to write a disk image of the Debian 12 bookworm variant as generated in the previous chapter.

Note: The variable

Warning: Avoid having the disk image on both the SD Card and the internal eMMC of the module.

As the Linux kernel on the module uses

whether the SD Card or the internal eMMC is used.

Insert an SD card into the host PC and check

Then, run this command, replacing

6.2.1 Compile rkdeveloptool

To write the image directly onto the on-board eMMC, the flashing tool rkdeveloptool is used, and it must be compiled on the

host PC:

# Install compile dependencies

# Download rkdeveloptool source code

# Compile rkdeveloptool

# Download miniloaders used for flashing

# Build miniloader binaries

# Tag linux-5.10-gen-rkr4.1

JAGUAR SBC-RK3588-AMR User Manual

must be already set as described in respective chapter.

and

to find out the device name that was used.

with the real device name:

to identify partitions to mount, it will be unpredictable

(continues on next page)

v1.0

Page 19

Table of Contents