Gyro Assembly Lifting - Seakeeper 3 Quick Start Manual

Procedure:
UNPACKING
INSTRUCTIONS
CRATE UNPACKING INSTRUCTIONS
7) The next step is to lift the gyro assembly out of the crate. The following photographs containing
green circles show acceptable methods to lift the gyro, such as a spreader bar or long lift slings.
Keep the lifting lines as close to vertical as possible. Do NOT use short lines as shown in the red
circle as the lift eyes may be damaged. (NOTE: GYRO MAY LOOK DIFFERENT THAN
ILLUSTRATED.)
Illustration "A"
Document #: Rev:
90394 3
Page:
4 of 5