Troubleshooting - Axis S2108 User Manual

Camera station appliance

Table of Contents

AXIS Camera Station S2108 Appliance

Troubleshooting

Perform a system recovery

If the device has had a complete system failure, you must use a recovery image to recreate the Windows® system. To download the

AXIS Recovery Kit, contact AXIS Technical Support and supply the serial number of your device.

1. Download the AXIS Recovery Kit and AXIS ISO to USB Tool.

Insert a USB drive into your computer.

Use a USB drive with a minimum of 16 GB to 32 GB.

The USB drive will be formatted, and all existing data will be erased.

3. Run the AXIS ISO to USB Tool and follow the onscreen instructions.

Writing data to the USB drive takes approximately 10 to 15 min. Don't remove the USB drive until the process is complete.

4. After the ISO to USB tool is complete, take the USB drive and plug it into your device.

5. Start your device.

6. When you see the AXIS splash screen, press F12.

7. Click UEFI: USB Drive.

8. Navigate to your USB drive and press ENTER. The system boots into the AXIS Recovery Kit.

9. Click Reinstall Operating System.

The recovery takes roughly 10 to 15 min to complete. You find detailed instructions in the download for the recovery kit.

Troubleshoot AXIS Camera Station

For information about how to troubleshoot AXIS Camera Station, go to the AXIS Camera Station user manual.

Table of Contents