• Liability report problems to Axis support staff by logging in to your private support area Every care has been taken in the preparation of this • chat with Axis support staff (selected countries document. Please inform your local Axis office of only) any inaccuracies or omissions.
Europe This digital equipment fulfills the requirements for RF Contact Information emission according to the Class B limit of EN 55022. Axis Communications AB Emdalavägen 14 This product fulfills the requirements for immunity 223 69 Lund according to EN 55024 office and commercial...
AXIS T8133 Midspan 30W Safety Information Read through this Installation Guide carefully before installing the product. Keep the Installation Guide for future reference. Hazard Levels DANGER Indicates a hazardous situation which, if not avoided, will result in death or serious injury.
• The Axis product shall be installed by a trained professional. NOTICE NOTICE NOTICE • The Axis product shall be used in compliance with local laws and regulations. • To use the Axis product outdoors, or in similar environments, it shall be installed in an approved outdoor housing.
AXIS T8133 Midspan 30W Installation Guide This Installation Guide provides instructions for installing AXIS T8133 on your network. Installation Steps Make sure the package contents, tools and other materials necessary for the installation are in order. See page 7 .
DATA & POWER OUT DATA IN Indicators Port LED Indicated Behavior Yellow On Power is on (power is active) Green On A remote terminal is connected Green Blinking Overload state or short-circuit Specifications Operating Conditions The Axis product is intended for indoor use.
AXIS T8133 Midspan 30W Mode Temperature Humidity Operating -20 °C to 40 °C 10-90% RH (non-condensing) (-4 °F to 104 °F) Storage Conditions Mode Temperature Humidity 10-90% RH Storage -20 °C to 70 °C (-4 °F to 158 °F) (non-condensing)
AXIS T8133 Midspan 30W Connectors and Buttons For specifications and operating conditions, see page 8 . Network Connector RJ45 Ethernet connector. Supports Power over Ethernet (PoE). NOTICE NOTICE NOTICE The product shall be connected using a shielded network cable (STP). All cables connecting the product to the network switch shall be shielded (STP) and intended for their specific use.
AXIS T8133 Midspan 30W Port LED indicator DATA & POWER OUT (connect to Axis product) DATA IN (connect to network) NOTICE NOTICE NOTICE • Do not cover the midspan or block the airflow to the PoE with any foreign objects. Keep the midspan away from excessive heat and humidity and free from vibration and dust.
• If an external power splitter is in use, verify that it works. • If possible reconnect the same powered device into a different midspan. Warranty Information For information about Axis’ product warranty and thereto related information, see www.axis.com/warranty/...