Temperature Gradient; Ventilation; Optimal Elevation; Lighting - Canon varioPRINT 6000 TITAN Series Manual

Canon

5.2. Temperature Gradient

If a sudden temperature change occurs, it may have an adverse effect on image
positioning. Sudden temperature changes may cause the paper to bend or
contract, cause the machine to malfunction, and form condensation. Every effort
should be made to maintain consistent temperature and humidity levels in the
operating environment at all times for the varioPRINT 6000 TITAN Series
machines.
If a humidifier must be used to regulate the humidity, use one that has a mineral
filter on it.

5.3 Ventilation

Ensure that there is an air exchange rate of at least 300 m
2,649 ft (75 m
3

5.4 Optimal Elevation

Install the machine at an elevation below 6,561.7' (2,000 m) (898.7 hPa pressure)
for optimal machine performance.

5.5 Lighting

Canon USA recommends installing the machine in a location with at least 500 lux
of lighting 29 1/2" (750 mm) above the floor for normal operations and
maintenance.

5.6 Sunlight

Avoid installing the machine in direct sunlight. Direct sunlight has adverse effects
on toner consistency and image quality. If direct sunlight is unavoidable, use
curtains to shade the machine. Make sure that the curtains do not block the
machine's ventilation slots or louvers, or interfere with the electrical cord or power
supply.

5.7 Ammonia

Avoid installing the machine where ammonia is emitted. In a sufficient amount,
ammonia will attack the surfaces of the machine's paper feed and image quality
components, thereby shortening their useful life and increasing the need for
periodic and remedial maintenance.
A professional assessment of the air quality in the room in which the machine is to
be installed is recommended prior to its installation.
Revision 4 varioPRINT 6000 TITAN Series Customer Expectations Document
varioPRINT 6000 TITAN Series Customer Expectations Document
) of space in the location where the machine will be installed.
3
3 per hour, and at least
Page 29