Operator Safety; Personal Safety - Canon varioPRINT 6000 TITAN Series Manual

Hide thumbs Also See for varioPRINT 6000 TITAN Series:

Table of Contents

Canon

9.5 Operator Safety

Customer safety is of the highest priority and concern when using the KOM

program. While performing service, safety guidelines are very important to follow.

Safety guidelines cover three specific areas:

WARNING

CERTAIN PARTS OF THE VARIOPRINT 6000 TP AND MICR SERIES EMIT A

STRONG MAGNETIC FIELD AND ARE A DANGER TO CUSTOMERS WITH

PACEMAKERS. WHILE THE MACHINE IS BEING SERVICED BY A SERVICE

TECHNICIAN, CUSTOMERS WITH PACEMAKERS ARE NOT ALLOWED IN

THE SERVICE TECHNICIAN'S WORK AREA.

Each operator is ultimately responsible for his or her own personal safety. To

minimize personal risk of injury, the operator must follow the guidelines below at

all times while conducting operator maintenance:

• Take notice of all posted Safety Labels outside and inside the machine.

• Follow all instructions when replacing parts.

• Always wear heat-resistant gloves when replacing the Spiral Cleaners.

• Use correct lifting techniques. Use two (2) or more people to lift parts

weighing more than 50 lb (22.7 kg).

• Remove loose clothing and jewelry.

• Wear proper footwear when lifting equipment.

• Do not eat, drink, or smoke near the equipment.

• Clean hands after contact with toner. Do not touch your eyes if toner is on

your hands.

• Do not wash or use hot water to remove toner from clothing. Doing so can set

the toner into the fabric. Quickly vacuum (using an approved vacuum for toner

pickup), or brush the affected clothing with light strokes.

• Some surfaces are hot and require a wait time to allow the areas to cool

before servicing.

Revision 4

varioPRINT 6000 TITAN Series Customer Expectations Document

Page 54

Table of Contents