Light Weight Media Kit-A1 - Canon varioPRINT 6000 TITAN Series Manual

Canon

6.9 Light Weight Media Kit-A1

Item
Supported Models
Supported Accessories
Description
Paper Size and Weight
Paper Type
Included and Excluded
Options
Air Pressure
Air Supply Rate
Air Quality Class
Air Supply Connection
4 12 lb bond/30 lb text (45 g/m
with the Light Weight Media Kit-A1 installed.
44 The varioPRINT 6000 TP and MICR TITAN, which include the Print Guard Module, are not supported.
45 All other accessories not listed here are not supported. See individual accessory specifications for media weight
ranges supported by each specific finisher.
46 The air filter requires pressurized air. If pressurized air is not available, the customer must purchase an air pump.
(Not included in the Light Weight Media Kit.)
Revision 4 varioPRINT 6000 TITAN Series Customer Expectations Document
varioPRINT 6000 TITAN Series Customer Expectations Document
Standard VP6000 TITAN only
• Input Interface Module
• Media Enhancement Module (Light Weight Media is only supported in
bypass mode)
Paper Input Module (Standard-B1 or Flex-A1)
•
45 High Capacity Stacker 2.1 (with Top Cover or Set Finisher)
•
High Capacity Stacker 2.1 with Set Finisher – Supported in Stacker tray
•
only. Not supported in Set Finisher trays.
• Tecnau SheetFeeder System
• ICMU-B1
The Light Weight Media module makes it possible for customers to produce
unique applications based on light weight media.
Same as print engine, including 13.8" x 19.7" (350 mm x 500 mm) size paper
with the PIM Flex-A1
Weight: 12 lb bond/30 lb text (45 g/m
Same as print engine.
Included: Air Guide, PRU (Paper Receiving Unit), Air-control, conditioning
unit, and air-filter (at the back of the engine), Mounting Kit, LWM
Fuse Belt, and Wide Media Fuse Roller
Excluded: Air Supply (provided by customer)
Minimum: 4 bar (58 psi)
Maximum: 8 bar (116 psi)
Approximately 200 L/min (7 CF/min)
Approximately 7:4:4, as defined in the ISO 8573-1:2010 standard
Connected via a 10 mm (outside diameter) Festo air tube to the LWM air
filter unit. Air supply must be connected by quick-connect coupling, or
provided with manual shut-off valve located within 1.5 m of connection point.
2 ) media is supported only on the standard varioPRINT 6000 TITAN model
Specifications
44
2 ) 4
46
Page 39