Honiture G20 Pro User Manual page 19

UK:AfterserviceUK@honiture.com US&CA:support02@honiture.com AU:AfterserviceAU@honiture.com
Automatic cleaning
Upon power on, the machine plans its cleaning route in a zigzag way and finishes cleaning the whole room in an orderly and efficent manner.
Once cleaning ends, the machine will automatically return to the dock for charging (cleaning mode by default).
Cleaned
To be cleaned
Spot cleaning
Use the button on the controller so that the machine will take itself as a center to sweep a round zone with the diameter of 1.2 m. Upon
cleaning, the robot will automatically return to the starting point and stop work.(The direction key on the smart APP can also be used to manually
control the machine to the cleaning position.)
EN-17