Use Instructions - Honiture G20 Pro User Manual

UK:AfterserviceUK@honiture.com US&CA:support02@honiture.com AU:AfterserviceAU@honiture.com

6.Use Instructions

Power on and off the machine
Tap and hold the button for 3 seconds to power on the machine. Then, the power indicator is on, and the vacuum cleaner enters the standby
state. Tap and hold the button for 3 seconds to power off the machine.
Note: The robot in the charging state cannot be powered off.
Cleaning/Pause
Once the machine powers on, tap the button on the robot or use the controller or the smart APP to start cleaning.
Note:
• The machine cannot clean liquid.
• If the power is lower than 15%, the machine cannot work. Therefore, charge the machine before cleaning.
• If the power is lower than 15% during cleaning, the machine will automatically return back to the dock for charging.
• Before cleaning, tidy up all kinds of wires on the ground (including the power cord of the dock). Otherwise, the machine may drag the wires
while cleaning, which may cause power failures of other electric appliance or damage items or wires.
Charging
Auto mode: After cleaning, the robot automatically returns to the dock for charging.
Manual mode: In the pause state, press the button to activate the "return for charging" mode or use the controller or the smart APP for
charging.
EN-15