Lifemax BRD2180 Owner's Manual & Assembly Instructions page 4

Bolt
#05 Hex Bolt (M10x55 mm)
[2 Pieces] Pre-assembled
#62 Right Pedal Hinge Bolt [1 Piece]
#72 Carriage Bolt (M8x73 mm)
[1 Piece]
Washer
#43 Arc Washer
(φ10x2.0xφ25xR28) [4 Pieces]
#74 Arc Washer
(φ8.2x2xφ20xR28)
[1 Piece]
Nut
#45 Nylon Nut (M10)
#47 Nut (M10)
[8 Pieces]
Pre-assembled
[4 pieces]
Others
#54 Lock Pin for Pedal Hinge
Bolt (φ3x16 mm)
[2 Pieces]
Tools
#68 Tool 1 (2-S17,S19)
[2 Pieces]
NA95N
Hardware & Tool List
The following hardware is used to assemble your unit. Please take a moment to familiarize yourself with these
items. Please note, most of these parts are already pre-assembled on your unit. Do not be alarmed if you see
parts on this page that are not included in your hardware packet.
#44 Hex Bolt (M10x45 mm)
#51 Spring Washer
( D12) [2 Pieces]
#81 Washer (φ8.2x1.2xφ17)
[3 Pieces] Pre-assembled
#48 Left Nylon Nut
[4 Pieces]
(with BLACK inner nylon ring)
(B0.5x20 S19)
[1 Piece]
#42 Cap #41 Cap
(S17)
[8 Pieces]
#69 Tool 2 (S8)
[1 Piece]
[4 Pieces]
#63 Left Pedal Hinge Bolt [1 Piece]
#76 Bolt (M8x30 mm)
#56 Washer (φ10.2xφ25x2)
[2 Pieces] Pre-assembled
#84 Washer (φ10.5x2xφ20)
[1 Piece]
#49 Right Nylon Nut
(with WHITE inner nylon ring)
(B0.5x20 S19)
[1 Piece]
#12 Handlebar
#17 Knob Bolt
(S13)
(M8x36 mm)
[2 Pieces]
[3 Pieces]
#85 Tool 4 (S6)
[1 Piece]
#46 Carriage Bolt (M10x57 mm)
[4 Pieces]
[2 Pieces] Pre-assembled
#64 Washer
(φ25xφ13x17x3.0) [2 Pieces]
#86 Wavy Washer
(φ16.2xφ21x17x0.3t mm) [2 Pieces]
#75 Nut (M8) #82 Nylon Nut (M8)
[1 Piece]
Axle (φ16x410 mm) [1 Piece]
#57 Knob Bolt
(M12x24 mm) [1 Piece]
Pre-assembled
#70 Tool 3 (S13-14-15)
[1 Piece]
[3 Pieces]
Pre-assembled
Page 3