Lifemax BRD2180 Owner's Manual & Assembly Instructions page 13

A s s e m b l y S t e p 6
Insert the Left Handlebar (#07L) into the Left Coupler
Bar (#04L) to a height setting that is comfortable to the user.
You can always re-adjust the height setting after complete
assembly for a better fit. Secure together using one Knob
Bolt (#17) as shown below.
Attach one Cap (#41) over the end of the Knob Bolt (#17) as
illustrated below.
Making sure the settings for both Handlebars is the same,
repeat this process on the other side using Right Handlebar
(#07R), Right Coupler Bar (#04R), and one Knob Bolt (#17).
If you encounter too much friction, try using WD40
or Vaseline as a lubricant.
#42 WASHER FOR M10 BOLT,T2.0 1PC
#42 WASHER FOR M10 BOLT,T2.0 1PC
NA95N
Assembly Instructions
#42 WASHER FOR M10 BOLT,T2.0 1PC
Hardware & Tool Required
Others
#41 Cap (S13)
[2 Pieces]
#17 Knob Bolt (M8x36 mm)
[2 Pieces]
Page 12