Advertisement
SELF CLEANING
You can use the self-clean function to remove scale and impurities.
Use the self-clean function once every two weeks. If the water in your area is very hard, the
self-clean function should be used more frequently.
•
Make sure the appliance is unplugged.
•
Set the steam control knob to position "
•
Fill the water tank to maximum level.
•
Select the maximum ironing temperature.
•
Put the plug in the wall socket.
•
Unplug the iron when the amber temperature pilot light has gone out.
•
Hold the iron over the sink, press and hold the self-clean button and gently shake the iron
and fro. (Steam and boiling water will come out of the soleplate. Impurities and flakes (if
any) will be flushed out.)
•
Release the self-clean button as soon as all water in the tank has been used up.
Repeat the self-clean process if the iron still contains a lot of impurities.
ANTI-DRIP:
This iron is equipped with a drip stop function: the iron automatically stops steaming when
the temperature is too low to prevent water from dripping out of the soleplate.
ANTI-CALC:
The Anti-calc function filtrate the minerals from the water to prevent mineral residue build up
at the steam chamber.
SPECIFICATIONS
Power: 220-240V • 50-60Hz • 2200-2600W
Environment friendly disposal
You can help protect the environment! Please remember to respect the local regulations:
hand in the non-working electrical equipments to an appropriate waste disposal center.
".
6
SOXRANITE QTI UKAZANIÄ DLÄ BUDUWEJ KONSULÆTACII.
7
Advertisement
