Table of Contents
Advertisement
4. Disconnect FPCs – While hovering the C-cover, disconnect the FPC from the main board with your other
hand. The FPC is easily disconnected by pulling up on the metal head vertically with a fingernail or Spudger
tool edge.
CAUTION:
down and FPC facing up to avoid bending/creasing the FPC. Be sure the key and trackpad side of the
C-cover is protected from cosmetic damage during storage.
WARNING:
13.5" or 15" device) is placed across the device to protect the battery from any accidental damage during
repair. Ensure corners of cover are aligned with the corners of the device at all times during repair. If
battery cover is misaligned during the repair operation in any way, re-align before continuing repair
activities.
IMPORTANT:
rSSD removal disconnects the battery from all device logical components for safety purposes. Refer to
Procedure-Removal (rSSD) section
26
When removed from the device, place the C-cover in a safe place with key and trackpad side
It is recommended a Microsoft provided ESD-safe battery cover appropriate for size (either
Remove rSSD (removable Solid-State Drive) whenever C-cover is removed from device.
(page
36) for details.
M1179886
Advertisement
Table of Contents
