Recommissioning - Becker T 4.10 Operating Instructions Manual

19 | T 4.10, T 4.16, T 4.25, T 4.40, X 4.10, X 4.16, X 4.25, X 4.40
6.7

RECOMMISSIONING

After the storage and shutdown period, the pump must be checked to ensure that it is in working order. In case of
non-operational capability, appropriate maintenance and servicing measures are to be carried out in order to restore
operational capability.
The following points must be worked through in the specified order to enable safe recommissioning of the pump:
1. The pump must be maintained, cleaned and, if necessary, repaired on the basis of the chapters 8.1 and 8.9.
2. The electrical connection must be carried out according to chapter 6.3. The power supply must not yet be
restored.
be restored.
3. All safety devices must be mounted and checked for functionality and effectiveness. Damaged parts must be
replaced immediately
"After completing the previously mentioned points and taking into account the chapter ""Switching on the pump"" see
chapter 6.4, the pump can be put back into operation."