Maintenance Intervals - Becker T 4.10 Operating Instructions Manual

24 | T 4.10, T 4.16, T 4.25, T 4.40, X 4.10, X 4.16, X 4.25, X 4.40
8.3

MAINTENANCE INTERVALS

The following overview shows the maintenance intervals:
T 4.10 DV, T 4.16 DV, T 4.25 DV, T 4.40 DV
Component
Intake filter - F1 ²
Intake filter - F3 (DSK
variant only) ²
C intake filter -
(optional) ²
Rotary vane ¹
Housing
General overhaul
Protective devices
Table 8.3: Maintenance intervals 1
X 4.10 DV, X 4.16 DV, X 4.25 DV, X 4.40 DV
Component
Intake filter - F1 ²
Intake filter - F3 (DSK
variant only) ²
C intake filter -
(optional) ²
Rotary vane ¹
Housing
General overhaul
Protective devices
Table 8.3: Maintenance intervals 2
40 - 200 h
(switch), check, clean
(switch), check, clean
F2
(switch), check, clean
clean
Visual inspection
40 - 200 h
(switch), check, clean
(switch), check, clean
F2
(switch), check, clean
clean
Visual inspection
3000 h
(switch), measure
7500 h
(switch), measure
8000 h (min. 3x/1a)
execute
20000 h (min. 5x/1a)
execute